Difference between revisions of "Kickflash"

From Inertial Computing
Jump to: navigation, search
 
Line 6: Line 6:
 
* 1x TI [http://focus.ti.com/lit/ds/symlink/sn74ls245.pdf 74LS245] Octal Bus Transceiver With 3-State Outputs
 
* 1x TI [http://focus.ti.com/lit/ds/symlink/sn74ls245.pdf 74LS245] Octal Bus Transceiver With 3-State Outputs
 
* 6x tiny decoupling capacitors
 
* 6x tiny decoupling capacitors
* 1x 912 ohm resistor next to the
+
* 1x 912 ohm resistor next to the WE jumper
 
* 1x Write Enable jumper
 
* 1x Write Enable jumper
  
 
Approximately 58 pins are active to the Zorro bus, 19 of which are power+ground related.
 
Approximately 58 pins are active to the Zorro bus, 19 of which are power+ground related.

Latest revision as of 16:25, 7 February 2010

The Individual Computers Zorro Kickflash, made in ~2003, is comprised of:

  • 1x Mach110-20JC PLCC44 CPLD
  • 2x AM29F040 PLCC32 4-megabit (512Kbytes in x16 mode) flash
  • 1x TI 74HC138 3-line to 8-line decoder/demultiplexer
  • 1x TI 74LS245 Octal Bus Transceiver With 3-State Outputs
  • 6x tiny decoupling capacitors
  • 1x 912 ohm resistor next to the WE jumper
  • 1x Write Enable jumper

Approximately 58 pins are active to the Zorro bus, 19 of which are power+ground related.