EVB860

From Inertial Computing
Jump to: navigation, search
pSOSystem V2.2.1
Copyright (c) 1991 - 1997, Integrated Systems, Inc.
--------------------------------------------------------------------------
START-UP MODE:
  Boot into pROBE+ stand-alone mode
NETWORK INTERFACE PARAMETERS:
  LAN interface is disabled
HARDWARE PARAMETERS:
  Serial channels will use a baud rate of 9600
HARDWARE PARAMETERS:
  BSP Revision: EST Bootrom, Rev: 4.0 (4-21-98)
  MPC8xx (Rev 1.3) CPU running at 25 Mhz with 5 Mhz input clock
  estPRO860 Board with 16 Mbytes DRAM and 512 Kbytes SRAM
  This board's Ethernet hardware address is 08:A0:1E:10:20:30
  After board is reset, start-up code will wait 60 seconds

boot device          : cpm
unit number          : 0
processor number     : 0
host name            : ala-wen
file name            : d:/tornado_ae/target/proj/hsimdppro8xxt_vxworks/ppc860gnu                                                                                                                                                              .debug/boot.txt
inet on ethernet (e) : 147.11.17.114
host inet (h)        : 147.11.17.32
gateway inet (g)     : 147.11.17.1
user (u)             : dpart
ftp password (pw)    : dpart
flags (f)            : 0x0
target name (tn)     : est860

Attached TCP/IP interface to cpm0.
Attaching interface lo0...done
Error: can not open d:/tornado_ae/target/proj/hsimdppro8xxt_vxworks/ppc860gnu.de                                                                                                                                                              bug/boot.txt.

Error loading file: errno = 0xd0003.
Can't load boot file!!